Show lldp config – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 567

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

517

53-1002581-01

LLDP Commands

24

Example

Console(config)#interface ethernet 1/1

Console(config-if)#lldp notification

Console(config-if)#

show lldp config

This command shows LLDP configuration settings for all ports.

Syntax

show lldp config [detail interface]

detail - Shows configuration summary.

interface

ethernet unit/port

unit - Unit identifier. (Range: 1)

port - Port number. (Range: 1-12)

port-channel channel-id (Range: 1-12)

Command Mode

Privileged Exec

Example

Console#show lldp config

LLDP Global Configuation

LLDP Enabled : Yes

LLDP Transmit Interval : 30 sec.

LLDP Hold Time Multiplier : 4

LLDP Delay Interval : 2 sec.

LLDP Re-initialization Delay : 2 sec.

LLDP Notification Interval : 5 sec.

LLDP Port Configuration

Port Admin Status Notification Enabled

-------- ------------ --------------------

Eth 1/1 Tx-Rx True

Eth 1/2 Tx-Rx True

Eth 1/3 Tx-Rx True

Eth 1/4 Tx-Rx True

Eth 1/5 Tx-Rx True

.

.

.

Console#show lldp config detail ethernet 1/1

LLDP Port Configuration Detail

Port : Eth 1/1

Admin Status : Tx-Rx

Notification Enabled : True

Basic TLVs Advertised:

port-description

system-name

system-description

Advertising