Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 722

Advertising
background image

672

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002581-01

Resetting the System

32

Parameters

The following parameters are displayed:

System Reload Configuration

Reset Mode – Restarts the switch immediately or at the specified time(s).

Immediately – Restarts the system immediately.

In – Specifies an interval after which to reload the switch. (The specified time must be
equal to or less than 24 days.)

hours – The number of hours, combined with the minutes, before the switch resets.
(Range: 0-576)

minutes – The number of minutes, combined with the hours, before the switch resets.
(Range: 0-59)

At – Specifies a time at which to reload the switch.

DD - The day of the month at which to reload. (Range: 1-31)

MM - The month at which to reload. (january ... december)

YYYY - The year at which to reload. (Range: 2001-2050)

HH - The hour at which to reload. (Range: 0-23)

MM - The minute at which to reload. (Range: 0-59)

Regularly – Specifies a periodic interval at which to reload the switch.

Time

HH - The hour at which to reload. (Range: 0-23)

MM - The minute at which to reload. (Range: 0-59)

Period

Daily - Every day.

Weekly - Day of the week at which to reload. (Range: Sunday ... Saturday)

Monthly - Day of the month at which to reload. (Range: 1-31)

Interface

To restart the switch:

1. Click System, then Reset.

2. Select the required reset mode.

3. For any option other than to reset immediately, fill in the required parameters

4. Click Apply.

5. When prompted, confirm that you want reset the switch.

Advertising