Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 686)

636 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Navigating the Web Browser Interface
31
Mirror Mirrors traffic matching a specified source address from any port on the
switch to a target port 756
Spanning Tree 759
Loopback Detection Configures Loopback Detection parameters 761
STA Spanning Tree Algorithm
Configure Global
Configure Configures global bridge settings for STP, RSTP and MSTP 763
Show Information Displays STA values used for the bridge 767
Configure Interface
Configure Configures interface settings for STA 768
Show Inform at on Displays interface settings for STA 771
MSTP Multiple Spanning Tree Algorithm 774
Configure Global 774
Add Configures initial VLAN and priority for an MST instance 774
Modify Configures the priority or an MST instance 774
Show Configures global settings for an MST instance 774
Add Member Adds VLAN members for an MST instance 774
Show Member Adds or deletes VLAN members for an MST instance 774
Show Information Displays MSTP values used for the bridge 774
Configure Interface 777
Configure Configures interface settings for an MST instance 777
Show Information Displays interface settings for an MST instance 777
Traffic
Rate Limit Sets the input and output rate limits for a port 781
Storm Control Sets the broadcast storm threshold for each interface 782
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port 784
Configure Global Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold 785
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages 786
Priority
Default Priority Sets the default priority for each port or trunk 789
Queue Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode 790
Trust Mode Selects DSCP or CoS priority processing 795
TABLE 151 Switch Main Menu (Continued)
Menu Description Page