Yaskawa CIMR-AU 200V Drives - Manual (Page 151)

4.3 Start-Up Flowcharts
These flowcharts summarize steps required to start the drive. Use the flowcharts to determine the most appropriate start-up
method for a given application. The charts are quick references to help familiarize the user with start-up procedures.
Note: 1. Refer to Application Selection on page 157 to set up the drive using one of the Application Presets.
2. Function availability differs for drive models 4A0930 and 4A1200. Refer to Parameter List on page 263 for details.
Flowchart Subchart Objective Page
A – Basic start-up procedure and motor tuning 152
–
A-1 Simple motor setup using V/f mode 153
A-2 High-performance operation using Open Loop Vector or Closed Loop Vector motor control 154
A-3 Setting up the drive to run a permanent magnet (PM) motor 155
4.3 Start-Up Flowcharts
YASKAWA ELECTRIC TOEP C710616 41E YASKAWA AC Drive - A1000 Quick Start Guide 151
4
Start-Up Programming & Operation