Lenze 8200 Frequency inverters - Manual (Page 141)

Configuration
8200SHB0199 7-4
7.2 Structure of the operating program
The operating program has three program levels: operating level, code level, and
parameter level. The controller parameters are set in the code level and the
parameter level.
FIG 7-2 Flow chart for parameter setting
7.2.1 Operating level
-
The controller is in the operating level after mains connection.
-
You can see the switch-on display (C004).
-
You can change to the code level by pressing the key PRG.
7.2.2 Code level
-
In the code level you select a code by pressing ▲ or ▼ .
-
Change to the parameter level by pressing the key SH.
Show/Hide Bookmarks