Lenze 8200 Frequency inverters - Manual (Page 39)

Technical Data
8200SHB0199 3-7
150 % overload 8214 8213 8212 8211 Type
EVF8214-E EVF8213-E EVF8212-E EVF8211-E Order No.
8214-V020 8213-V020 8212-V020 8211-V020 Type Variant “HVAC”
EVF8214-E-V020 EVF8213-E-V020 EVF8212-E-V020 EVF8211-E-V020 Order No.
Motor voltage 3) V
M
[V] 0 - 3 x V
mains
/ 0 Hz ¡ 50 Hz, if required up to 480 Hz
Power loss (operation with I
rx
) P
loss
[W] 55 75 90 100
Power derating [%/K]
[%/m]
40 •C < T
V
< 50 •C: 2.5 %/K
1000 m a.m.s.l. h $ 4000 m a.m.s.l.: 5 %/1000 m
Field
frequency Resolution Absolute 0.02 Hz Field
frequency Digital setpoint selection
Accuracy á0.05 Hz
Analog setpoint selection Linearity á0.5 %(max. selected signal level: 5 V or 10 V) Analog setpoint selection
Temperature
sensitivity 0 ¡ 40 •C: +0.4 %
Offset á0 %
Weight m [kg] 2.2 2.2 2.2 2.2
Printed in bold Data for the operation with factory setting and a chopper frequency of 8 kHz.
1) This power can be additionally obtained when operating a matching motor
2) The currents apply to a periodical load cycle with 1 minute overcurrent with the current mentioned here and
2 minutes base load with 75 % I
rx
.
3) With mains choke/mains filter: max. output voltage = approx. 96 % of the mains voltage
4) Only with variant “HVAC”
* Chopper frequency of the inverter
Show/Hide Bookmarks