Lenze 8200 Frequency inverters - Manual (Page 74)

Installation
8200SHB0199 4-17
4.1.5.4 Assembly preparations
-
Apply the heat-conducting paste before you bolt the cooler onto the cold
plate of the controller to reduce the heat-transfer resistance to a minimum.
-
The heat-conducting paste, which you will find in the accessory kit, will be
enough for an area of approx. 1000 cm
2 .
Application of heat-conducting paste
1. Clean the contact surfaces of the cooler and cold plate with ethanol.
2. Apply the heat-conducting paste thinly with a scraper or a brush.
Show/Hide Bookmarks