Lenze 8200 Frequency inverters - Manual (Page 36)

Technical Data
8200SHB0199 3-4
3.3 General data/application conditions
Field Values
Vibration resistance Germanischer Lloyd, general conditions
Humidity class Humidity class F without condensation (average relative humidity 85 %)
Permissible temperature
range During transport of the controller: -25 •C¡+70 •C Permissible temperature
range
During storage of the controller: -25 •C¡+55 •C
During operation of the controller: 0 •C¡+40 •C
+ 40 •C¡+50 •C
without power derating
with power derating
Permissible installation
height h $ 1000 m a.m.s.l.
1000 m a.m.s.l. h $ 4000 m a.m.s.l.
without power derating
with power derating
Degree of pollution VDE 0110 part 2 pollution degree 2
Noise emission Requirements to EN 50081-2, EN 50082-1, IEC 22G-WG4 (Cv) 21
Limit value class A to EN 55011 (industry) with mains filter
Limit value class B to EN 55022 (residential area) with mains filter and installation into control
cabinet
Noise immunity Limit values maintained with mains filter
Requirements to EN 50082-2, IEC 22G-WG4 (Cv) 21
Requirements
Standard Severities
ESD EN61000-4-2 3, i.e. 8 kV with air discharge,
6 kV with contact discharge
RF interference (enclosure) EN61000-4-3 3, i.e. 10 V/m; 27 ¡1000 MHz
Burst EN61000-4-4 3/4, i.e. 2 kV/5 kHz
Surge
(Surge on mains cable) IEC 1000-4-5 3, i.e. 1.2/50 ³s,
1 kV phase-phase,
2 kV phase-PE
Insulation strength Overvoltage category III to VDE 0110
Packaging to DIN 4180 Types 820X, 821X, 824X
Types 822X,
821X/2X/4X HVAC (V020) Dust packaging
Transport packaging
Enclosure Types 82XX, 82XX HVAC (V020) IP20
NEMA 1: Protection against contact
Types 8215 - 8218, 822X, 824X,
8215/16/17/18/2X/4X HVAC (V020) IP41 on the heat-sink side with thermal separation in
push-through technique
Approvals Types 82XX, 82XX HVAC (V020) CE: Low-Voltage Directive and
Electromagnetic Compatibility
Types 822X, 824X,
822X/4X HVAC (V020) UL 508:
UL 508C: Industrial Control Equipment
Power Conversion Equipment
Show/Hide Bookmarks