Lenze 8200 Frequency inverters - Manual (Page 19)

Preface and general information
8200SHB0199 1-3
1.3 Legal regulations
Identification Nameplate CE-identification Manufacturer Identification
Lenze controllers are unambiguously
designated by the contents of the
nameplate. Conforms to the EC Low Voltage
Directive Lenze GmbH & Co KG
Postfach 101352
D-31763 Hameln
Application
as directed 82XX frequency inverter
- operate the controller only under the conditions prescribed in these operating instructions.
- are components
- for open and closed looped control of variable speed drives with asynchronous standard motors, reluctance
motors, PM synchronous motors with asynchronous damper cage,
- for installation into a machine,
- used for assembly together with other components to form a machine.
- are electric units for the installation into control cabinets or similar enclosed operating housing.
- comply with the requirements of the Low-Voltage Directive.
- are not machines for the purpose of the Machinery Directive.
- are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 82XX frequency inverters
- meet the EC Electromagnetic Compatibility Directive if they are installed according to the guidelines of CE-typical
drive systems.
- can be used
- on public and non-public mains,
- in industrial as well as residential and commercial premises.
- The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed inappropriate!
Liability - The information, data, and notes in these instructions met the state of the art at the time of printing. Claims on
modifications referring to controllers which have already been supplied cannot be derived from the information,
illustrations, and descriptions.
- The specifications, processes, and circuitry described in these instructions are for guidance only and must be
adapted to your own specific application. Lenze does not take responsibility for the suitability of the process and
circuit proposals.
- The specifications in these instructions describe the product features without guaranteeing them.
- Lenze does not accept any liability for damage and operating interference caused by:
- disregarding the operating instructions
- unauthorised modifications to the controller
- operating errors
- improper working on and with the controller
Warranty - Warranty conditions: See Sales and Delivery Conditions of Lenze GmbH & Co KG.
- Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
- The warranty is void in all cases where liability claims cannot be made.
Disposal Material Recycle Dispose Disposal
Metal - -
Plastic - -
Assembled PCBs - -
Show/Hide Bookmarks