Yaskawa AC Drive P1000 Bypass Technical Manual - Manual (Page 22)

u Drive Label Warning Example
Always heed the warning information listed in Figure i.2 in the position shown in Figure i.3 .
WARNING
Read manual before installing.
Wait 5 minutes for capacitor
discharge after disconnecting
power supply.
To conform to requirements,
make sure to ground the supply
neutral for 400V class.
After opening the manual switch
between the drive and motor,
please wait 5 minutes before
inspecting, performing
maintenance or wiring the drive.
Risk of electric shock.
Hot surfaces
Top and Side surfaces may
become hot. Do not touch.
●
●
●
●
●
Figure i.2 Warning Information Example
Warning Label
600V 3Phase 5.5kW/3.7kW
Figure i.3 Warning Information Position
i.2 General Safety
22 YASKAWA SIEP YAIP1B 01A YASKAWA AC Drive – P1000 Bypass Technical Manual