Yaskawa AC Drive P1000 Bypass Technical Manual - Manual (Page 258)

No.
(Addr.
Hex)
Name Description Values Page
T1-07
(0707)
Motor Base Speed
Sets the rated speed of the motor as specified on the motor nameplate. Default: 1750 r/min
Min.: 0
Max.: 14400
80
T1-11
(070B)
Motor Iron Loss
Sets the iron loss for determining the Energy Saving coefficient.
The value is set to E2-10 (motor iron loss) set when the power is cycled. If
T1-02 is changed, a default value appropriate for the motor capacity that was
entered will appear.
Default: 14 W <4>
Min.: 0
Max.: 65535
80
<1> The availability of certain Auto-Tuning methods depends on the control mode selected for the drive.
<2> Default setting is dependent on parameter o2-04, Drive Model Selection.
<3> Values shown are specific to 208 V bypass drives. Double the value for 480 V bypass drives..
<4> Default setting value differs depending on the motor code value and motor parameter settings.
B.12 S: Special Application
258 YASKAWA SIEP YAIP1B 01A YASKAWA AC Drive – P1000 Bypass Technical Manual