Yaskawa AC Drive P1000 Bypass Technical Manual - Manual (Page 60)

u LCD Display
5
3
1 2
6
]
4
]
7
Figure 4.2 LCD Display
Table 4.1 Display and Contents
No. Name Display Content
1 Bypass/Drive Status Display
DRV
(not
blinking)
Displayed when In Drive Mode. The bypass will run in Drive Mode when a Run command is present.
DRV
(blinking)
Displayed when in Drive Mode, but a condition is making the bypass run in Bypass Mode.
BYP
(not
blinking)
Displayed when in Bypass Mode. The Bypass will run in Bypass Mode when a Run command is
present.
Drive input contactor K1 is open and the drive will be powered down.
BYP
(blinking)
Displayed when in Bypass Mode with Drive Test Mode set. The bypass will run in Bypass Mode
when a Run command is present.
Drive input contactor K1 is closed and the drive is powered on.
4.2 Using the HOA Keypad
60 YASKAWA SIEP YAIP1B 01A YASKAWA AC Drive – P1000 Bypass Technical Manual