Toshiba H9 - Manual (Page 174)

166 H9 ASD Installation and Operation Manual
Acc/Dec Pattern 2
Program
⇒
Special
⇒
Accel/Decel #1 – #4 Settings
This parameter enables a user-selected preprogrammed output profile that
controls the acceleration and deceleration pattern for the #2 Accel/Decel
parameter.
Settings:
0 — Linear
1 — S-Pattern 1
2 — S-Pattern 2
Direct Access Number — F503
Parameter Type — Selection List
Factory Default — Linear
Changeable During Run — Yes
F503 F503