F970, F972, F971 – Toshiba H9 User Manual

Page 239

Advertising
background image

H9 ASD Installation and Operation Manual

231

Monitor Output Function Command 31

Program

My Function

My Function Monitor

This parameter plays a role in the setup of the My Function feature by allowing
the user to select the Peak, Minimum, or Normal (Avg.) value of the
parameter

F969

selection to be recorded and output as a monitored function.

See the My Function Instruction Manual (P/N 58692) for a complete
description of the setup requirements and operational information of the
Monitor Output Function parameter.

Settings:

0 — Normal
1 — Peak
2 — Minimum

Direct Access Number — F970

Parameter Type — Selection List

Factory Default — Normal

Changeable During Run — Yes

Monitor Output Function 41

Program

My Function

My Function Monitor

This parameter plays a role in the setup of the My Function feature by
establishing the function that is to be recorded and output as the Peak,
Minimum, or Average value as selected at parameter

F971

.

Select the Monitor Display Input Setting number from

Table 10 on pg. 243

to

output the corresponding function.

Use the Communication Number if operating using communications.

See the My Function Instruction Manual (P/N 58692) for a complete
description of the setup requirements and operational information of the
Monitor Output Function parameter.

Direct Access Number — F971

Parameter Type — Selection List

Factory Default — 2000

Changeable During Run — Yes

Monitor Output Function Command 41

Program

My Function

My Function Monitor

This parameter plays a role in the setup of the My Function feature by allowing
the user to select the Peak, Minimum, or Normal (Avg.) value of the
parameter

F971

selection to be recorded and output as a monitored function.

Settings:

0 — Normal
1 — Peak
2 — Minimum

See the My Function Instruction Manual (P/N 58692) for a complete
description of the setup requirements and operational information of the
Monitor Output Function parameter.

Direct Access Number — F972

Parameter Type — Selection List

Factory Default — Normal

Changeable During Run — Yes

F970

F971

Advertising