Toshiba H9 - Manual (Page 278)

270 H9 ASD Installation and Operation Manual
H9 ASD Optional Devices
The ASD may be equipped with several options which are used to expand the functionality of the ASD.
Table 23 lists the available options and their functions.
Table 23. H9 Optional devices and functions.
Part Identifier Device Name Device Function
ASD-CAB-USB H9 USB Communication Cable
Used to connect the ASD to a PC via the USB port of the
PC.
ASD-EOI-HH-G9 Display Module Docking Station Used to flash the 9-series display module.
ASD-MTG-KIT9 9-Series EOI Remote Mounting Kit Hardware used to mount 9-series ASD EOI remotely.
ASD-TB1-SIM9 ASD Input/Output Signal Simulator Used to simulate the ASD I/O monitor and control signals.
DEV002Z DeviceNet Module
Allows the H9 ASD to communicate via DeviceNet with
other DeviceNet-supported equipment including a host
computer.
ETB003Z Expansion I/O Board 1 Expands the Input/Output functionality of the H9 ASD.
ETB004Z Expansion I/O Board 2 Expands the Input/Output functionality of the H9 ASD.
PDP002Z ProfiBus DP Module
Allows the H9 ASD to communicate via ProfiBus with
other ProfiBus-supported equipment including a host
computer.
USB001Z USB-to-Serial Converter
Allows for the USB port of a computer to be used as a
communications port for monitoring and controlling the
H9 ASD.
VEC007Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 5-volt encoder).
VEC004Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 12-volt encoder).
VEC005Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 15-volt encoder).
VEC006Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 24-volt encoder).
Note: See the user manual of the applicable option for further information on each item.