Toshiba H9 User Manual
Page 48
40
H9 ASD Installation and Operation Manual
9 — Option V/I
This setting allows for the use of the optional voltage/current frequency-control interface.
10 — UP/DOWN Frequency
A discrete terminal may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned terminal to CC. See
for further
information on this feature.
11 — Pulse Input Option
This setting is used to allow the system to use a pulsed input for frequency control. See
Input Point 1 Setting on pg. 122
for further information on this feature.
12 — Pulse Input (motor CPU)
This setting is used to allow the system to use a pulsed input for frequency control. See
Input Point 1 Setting on pg. 122
for further information on this feature.
13 — Binary/BCD Input Option
Allows for discrete terminal to be used for frequency-control input.