Toshiba H9 - Manual (Page 264)

256 H9 ASD Installation and Operation Manual
Enclosure Dimensions and Conduit Plate
Information
The H9 ASD part numbering convention is as indicated below.
The enclosure dimensions for each typeform and the associated conduit plate type are listed in Tables 16
and 17 .
The conduit plates that are referenced in Tables 16 and 17 are shown in Figures 35 , 36 , and 37 .
H9 Part Numbering Convention.
Note: The Type 1 enclosed versions of these drives meet or exceed the specification UL 50-
1995, the Standard for Heating and Cooling Equipment, and complies with the
applicable requirements for installation in a compartment handling conditioned air.
Note: All Toshiba ASD enclosures carry an IP20 rating.
Enclosure Dimensions
Table 16. 230-Volt H9 ASD Systems.
Model Number
VT130H9U
Enclosure
Figure
Number
A
Height
(in/mm)
B
Width
(in/mm)
C
Depth
(in/mm)
D
Mounting Hole
Height
(in/mm)
E
Mounting Hole
Width
(in/mm)
R
Mounting Hole
Diameter
(in/mm)
Conduit
Plate
( Figure 35,
36, and 37 )
2035
Figure 32
12.4/315 6.1/155 6.6/168 8.7/221 4.5/114
0.24/6.10
Figure 35-A
2055
2080
15.0/381 6.9/175 6.6/168 11.1/282 6.2/158
Figure 35-B
2110 Figure 35-C
2160
19.3/490 9.1/231 7.6/193 15.2/386 8.3/211 Figure 35-D 2220
2270
2330
Figure 33
25.9/658 11.1/282 13.2/335 25.0/635
8.0/203
0.24/6.10 Figure 35-E
2400
33.1/841 14.3/363 15.0/381 32.3/820 0.38/9.65 Figure 36-G
2500
2600
2750