Toshiba H9 - Manual (Page 36)

28 H9 ASD Installation and Operation Manual
Electronic Operator Interface
The H9 ASD Electronic Operator Interface (EOI) is comprised of an LED display, an LCD display, two
LEDs, a rotary encoder, and five keys. These items are described below and their locations are provided in
Figure 21. on pg. 29 .
EOI Operation
The EOI is the primary input/output device for the user. The EOI may be used to monitor system
functions, input data into the system, perform diagnostics, and view performance data (e.g., motor
frequency, bus voltage, torque, etc.).
The software used with the H9 ASD is menu driven; thus, making it a select and click environment. The
operating parameters of a motor may be selected and viewed or changed using the EOI (or via
communications).
EOI Remote Mounting
The EOI may be mounted remotely using the optional ASD-MTG-KIT9. The kit contains all of the
hardware required to mount the EOI of the 9-Series ASD remotely.
System operation and EOI operation while using the remotely-mounted EOI are the same as with the
ASD-mounted configuration.