Synaccess Networks NP-0801DTM - Manual (Page 111)

3GPP TS 27.007 AT COMMANDS
111 HSPA+ AT Commands Reference Guide
Note: Only the “IP” PDP_Type is currently supported.
Syntax
Command Command type
AT+CGEQMIN=
[<cid>
[,<Traffic class>
[,<Maximum bitrate UL>
[,<Maximum bitrate DL>
[,<Guaranteed bitrate UL>
[,<Guaranteed bitrate DL>
[,<Delivery order>
[,<Maximum SDU size>
[,<SDU error ratio>
[,<Residual bit error ratio>
[,<Delivery of erroneous
SDUs>
[,<Transfer delay>
[,<Traffic handling priority>
[,<Source statistics
descriptor> [,<Signalling
indication>]]]]]]]]]]]]]]]
AT+CGEQMIN? Read
AT+CGEQMIN=?
Parameters and Values
<cid> PDP context identification. See +CGDCONT command.
<Traffic class> Traffic class
0 Conversational. Default: 0.
1 Streaming
2 Interactive
3 background
<Maximum bitrate UL> Maximum bitrate Up Link (kbits/s)
0 Default: 0.
1‐568
576‐8640
<Maximum bitrate DL> Maximum bitrate down link (kbits/s)
0 Default: 0.
1‐568
576‐8640
8700‐16000
<Guaranteed bitrate UL> Guaranteed bitrate up link(kbits/s)
0 Default: 0.
1‐568
576‐8640
<Guaranteed bitrate DL> the guaranteed bitrate down link(kbits/s)