Synaccess Networks NP-0801DTM - Manual (Page 267)

E‐MAIL MANAGEMENT AT COMMANDS
267 HSPA+ AT Commands Reference Guide
„
Ensure that no other commands are issued during command execution.
„
To avoid malfunctions, wait for the OK or ERROR / +CMS ERROR:<err> response before issuing further
commands.
„
Maximum length for message body is 1500. Data in excess of the maximum is discarded.
Examples
AT#EMAILD=”[email protected]”,”subject of the mail”
>message body… this is the text of the mail message…
CTRL-Z
..wait..
OK
Message has been sent.
E‐mail Parameters Save #ESAV
Execute command stores the e‐mail parameters in the device’s non‐volatile memory. Parameters stored are:
„
E‐mail user name
„
E‐mail password
„
E‐mail sender address
„
E‐mail SMTP server
Test command returns the OK result code.
Syntax
Command Command type
AT#ESAV Execute
AT#ESAV=? Test
Notes
„
If some parameters are not previously specified a default value is used.
E‐mail Parameters Reset #ERST
Execute command resets the e‐mail parameters to the “Default ” configuration and stores them in the non‐volatile
memory of the device. Parameters reset are:
„
E‐mail User Name
„
E‐mail Password
„
E‐mail Sender Address
„
E‐mail SMTP server
Test command returns the OK result code.