Synaccess Networks NP-0801DTM - Manual (Page 134)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
HSPA+ AT Commands Reference Guide 134
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>[,<tooa/toda>,
<length>]<CR><LF><data>[<CR><LF>
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>[,<tooa/toda>,
<length>]<CR><LF><data>[...]]
where:
<index> ‐ message position in the storage
<stat> ‐ message status
<oa/da> ‐ String type, originator/destination address, represented in
the currently selected character set. See +CSCS.
<alpha> ‐ String type alphanumeric representation of <da> or <oa>,
corresponding to an entry found in the phonebook; used character set
is the one selected with command +CSCS.
<scts> ‐ TP‐Service Centre Time Stamp in Time String Format
<tooa/toda> ‐ type of number <oa/da>
129 ‐ number in national format
145 ‐ number in international format (contains the "+")
<length> ‐ text length
<data> ‐ TP‐User‐Data
„
If <dcs> indicates that GSM03.38 default alphabet is used
, each character of GSM alphabet is converted into
current TE character set. See +CSCS.
„
If <dcs> indicates that 8‐bit or UCS2 data coding scheme
is used, each 8‐bit octet is converted into two IRA
character long hexadecimal number (for example octet
0x2A is converted as two characters 0x32 0x41)
„
If <fo> indicates that a UDH is present each 8‐bit octet is
converted into two IRA character long hexadecimal
number. The <length> indicates text length in characters
without UDH length.
If there is at least one message delivery confirm to be listed the
representation format is:
+CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>
[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>
[...]]
where
<index> ‐ Message position in the storage
<stat> ‐ Message status
<fo> ‐ First octet of the message PDU
<mr> ‐ Message reference number; 3GPP TS 23.040 TP‐Message‐
Reference in integer format
<ra> ‐ String type, recipient address, represented in the currently
selected character set. See +CSCS.
<tora> ‐ Type of number <ra>
<scts> ‐ Arrival time of the message to the SC
<dt> ‐ Sending time of the message
<st> ‐ Message status as coded in the PDU
Note: If parameter is omitted the command returns the list of sms with
“REC UNREAD” status.