Synaccess Networks NP-0801DTM - Manual (Page 217)

CUSTOM AT COMMANDS
217 HSPA+ AT Commands Reference Guide
Socket 2 is closed.
Socket 3 is UDP dialer.
Socket 4 is UDP listener.
Socket 5 is TCP dialer.
Socket 6 is TCP listener.
Context Activation #SGACT
Execute command activates or deactivates either the GSM context or the specified PDP context.
Read returns the state of all the contexts that have been defined through the commands +CGDCONT or
#GSMCONT
#SGACT: <cid1>,<Stat1><CR><LF>
…
#SGACT: <cid5>,<Stat5>
where:
<cidn> PDP context identifier.
<statn> Context status.
0 Context deactivated.
1 Context activated.
Test command reports the range for the parameters <cid> and <stat>.
Syntax
Command Command type
AT#SGACT=<cid>,<stat>[,<userId>,<pwd>] Execute
AT#SGACT? Read
AT#SGACT=? Test