Synaccess Networks NP-0801DTM - Manual (Page 306)

AUDIO COMMANDS
HSPA+ AT Commands Reference Guide 306
Handset Microphone Gain #HSMICG
Set command sets the handset microphone input gain.
Read command returns the current handset microphone input gain, in the format:
#HSMICG: <level>
Test command returns the supported range of values for <level>.
Syntax
Command Command type
AT#HSMICG=[<level>] Set
AT#HSMICG? Read
AT#HSMICG=? Test
Parameters and Values
<level> Handset microphone input gain.
0‐7 Handset microphone gain (+6dB/step. Default: 0.
Handset Receiver Gain #HSRECG
Set command sets the handset analogue output gain.
Read command returns the current handset analog output gain, in the format:
#HSRECG: <level>
Test command returns the supported range of values of <level>.
Syntax
Command Command type
AT#HSRECG=<level> Set
AT#HSRECG? Read
AT#HSRECG =? Test
Parameters and Values
<level> Handset analogue output gain.
0‐6 Handset analogue output ‐3dB/step. Default: 0.
Notes
„
To save the value of <level> in non‐volatile memory, use the AT&W command.
Set Handset Sidetone #SHSSD
Set command enables or disables the sidetone on handset audio output.
Read command reports whether the headset sidetone is currently enabled or not, in the format:
#SHSSD: <mode>