Synaccess Networks NP-0801DTM - Manual (Page 77)

3GPP TS 27.007 AT COMMANDS
77 HSPA+ AT Commands Reference Guide
<ber> Bit error rate (in percent)
0 Less than 0.2%
1 0.2% to 0.4%
2 0.4% to 0.8%
3 0.8% to 1.6%
4 1.6% to 3.2%
5 3.2% to 6.4%
6 6.4% to 12.8%
7 More than 12.8%
99 Not known or not detectable
Notes
„
Reference: 3GPP TS 27.007.
Indicator Control +CIND
Set command controls the registration state of ME indicators, in order to automatically send the +CIEV URC,
whenever the value of the associated indicator changes. The supported indicators (<descr>) and their order
appear from test command AT+CIND=?.
Read command returns the current value of ME indicators, in the format:
+CIND: <ind>[,<ind>[,…]]
Note: The order of the values <ind>s is the same order appears from test command AT+CIND=?
Test command returns pairs, where string value <descr> is a description (maximum of 16 characters) of the
indicator and compound value is the supported values for the indicator, in the format:
+CIND: ((<descr>, (list of supported <ind>s))[,(<descr>, (list of supported <ind>s))[,…]])
where:
<descr> Indicator names as follows (along with their <ind> ranges).
“battchg” Battery charge level.
<ind> Battery charge level indicator range .
0‐5
99 Not measurable.
“signal” Signal quality.
<ind> Signal quality indicator range.
0‐7
99 Not measurable.
“service” Service availability.
<ind> Service availability indicator range.
0 Not registered to any network.
1 Registered.
“sounder” Sounder activity.
<ind> Sounder activity indicator range.