Synaccess Networks NP-0801DTM - Manual (Page 283)

SIM TOOLKIT COMMANDS
283 HSPA+ AT Commands Reference Guide
where:
<text> ‐ text to be displayed to user
if <cmdType>=33 (DISPLAY TEXT)
#STGI: <cmdType>,<cmdDetails>[,<text>]
where:
<cmdDetails> ‐ unsigned Integer used as a bit field.
0‐255 ‐ used as a bit field:
bit 1:
0 ‐ normal priority
1 ‐ high priority
bits 2 to 7: reserved for future use
bit 8:
0 ‐ clear message after a delay
1 ‐ wait for user to clear message
<text> ‐ text to be displayed to user
if <cmdType>=34 (GET INKEY)
#STGI: <cmdType>,<commandDetails>,<text>
where:
<commandDetails> ‐ unsigned Integer used as a bit field.
0‐255 ‐ used as a bit field:
bit 1:
0 ‐ Digits only (0‐9, *, # and +)
1 ‐ Alphabet set;
bit 2:
0 ‐ SMS default alphabet (GSM character set)
1 ‐ UCS2 alphabet
bit 3:
0 ‐ Character sets defined by bit 1 and bit 2 are enabled
1 ‐ Character sets defined by bit 1 and bit 2 are disabled and the "Yes/No"
response is requested
bits 4 to 7:
0
bit 8:
0 ‐ No help information available
1 ‐ Help information available
<text> ‐ String as prompt for text.
if <cmdType>=35 (GET INPUT)
#STGI: <cmdType>,<commandDetails>,<text>,<responseMin>,
<responseMax>[,<defaultText>]
where:
<commandDetails> ‐ unsigned Integer used as a bit field.
0‐255 ‐ used as a bit field:
bit 1:
0 ‐ Digits only (0‐9, *, #, and +)
1 ‐ Alphabet set