Synaccess Networks NP-0801DTM - Manual (Page 167)

CUSTOM AT COMMANDS
167 HSPA+ AT Commands Reference Guide
Syntax
Command Command type
AT#SERVINFO Execute
AT#SERVINFO=? Test
Read Current Network Status #RFSTS
Execute command reads current network status, in the format:
GSM network
#RFSTS:<PLMN>,<ARFCN>,<RSSI>,<LAC>,<RAC>,<TXPWR>,<MM>,
<RR>,<NOM>,<CID>,<IMSI>,<NetNameAsc>,<SD>,<ABND>
where:
<PLMN> Country code and operator code(MCC, MNC)
<ARFCN> GSM Assigned Radio Channel
<RSSI> Received Signal Strength Indication
<LAC> Localization Area Code
<RAC> Routing Area Code
<TXPWR> Tx Power
<MM> Mobility Management state
<RR> Radio Resource state
<NOM> Network Operator Mode
<CID> Cell ID
<IMSI> International Mobile Subscriber Identity
<NetNameAsc> Operator name
<SD> Service Domain
0 No Service
1 CS only
2 PS only
3 CS+PS
<ABND> Active band
1 GSM 850
2 GSM 900
3 DCS 1800
4 PCS 1900
WCDMA network
#RFSTS:
<PLMN>,<UARFCN>,<PSC>,<Ec/Io>,<RSCP>, RSSI>,<LAC>,
<RAC>,<TXPWR>,<DRX>,<MM>,<RRC>,<NOM>,<BLER>,<CID>,<IMSI>,
<NetNameAsc>,<SD>,<nAST>[,<nUARFCN><nPSC>,<nEc/Io>]
where: