Synaccess Networks NP-0801DTM - Manual (Page 193)

CUSTOM AT COMMANDS
193 HSPA+ AT Commands Reference Guide
16 ‐ HAMR, AMR half rate mode enabled
(if <format>=1)
<codec_used> ‐ one of the following channel modes:
None – no TCH
FR ‐ full rate speech 1 on TCH
EFR ‐ full rate speech 2 on TCH
HR ‐ half rate speech 1 on TCH
FAMR ‐ full rate speech 3 – AMR on TCH
HAMR ‐ half rate speech 3 – AMR on TCH
FD96 ‐ full data 9.6
FD48 ‐ full data 4.8
FD24 ‐ full data 2.4
HD48 ‐ half data 4.8
HD24 ‐ half data 2.4
FD144 ‐ full data 14.4
<codec_setn>
FR ‐ full rate mode enabled
EFR ‐ enhanced full rate mode enabled
HR ‐ half rate mode enabled
FAMR ‐ AMR full rate mode enabled
HAMR ‐ AMR half rate mode enabled
Note: The command refers to codec information in speech call and to channel mode in data call.
Note: If AT#CODEC is 0, the reported codec set for <format>=0 is 31 (all codec).
Select Language #LANG
Set command selects the currently used language for displaying different messages.
Read command reports the currently selected <lan> in the format: