Synaccess Networks NP-0801DTM - Manual (Page 302)

GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide 302
<transport_protocol>
0 C‐Plane protocol.
1 SUPL protocol.
2 Invalid.
<Notif_type>
0 Notify.
1 Verify request. No response is treated as permission granted.
See $LCSLRV.
2 Verify request. No response is treated as permission denied.
See $LCSLRV.
<Loc_estimate_type>
0 Current location.
1 Current or last location known.
2 Initial location.
<Requestor_Id_Encoding_type>
<Client_Name _Encoding_type>
0 UCS2.
1 GSM default format.
2 UTF‐8 format.
3 invalid format.
<Client_Name_Type>
<Requestor_Id_Type>
0 MSISDN.
1 IMSI.
2 IPV4.
3 IPV6.
4 Logical name.
5 Email address.
6 URL.
7 SIP URL.
8 IMS Public Identity.
9 USSD type.
10 Invalid type.
<Client_Name>
<Requestor_Id>
<Codeword> Displayed as per data coding scheme.
<Service_Type_id>
0‐127
<reqid> Integer that identifies the request.
Note: <reqid> uniquely identifies the MT‐LR sent by the
network and the same <reqid> is returned in AT$LCSLRV
command if <Notif_type> is of type “Verify request”.