Synaccess Networks NP-0801DTM - Manual (Page 284)

SIM TOOLKIT COMMANDS
HSPA+ AT Commands Reference Guide 284
bit 2:
0 ‐ SMS default alphabet (GSM character set)
1 ‐ UCS2 alphabet
bit 3:
0 ‐ ME may echo user input on the display
1 ‐ User input is not revealed in any way. Hidden entry mode (see GSM 11.14) is
only available when using digit input. In hidden entry mode only characters (‘0’‐
‘9’, ‘*’ and ‘#‘) are allowed.
bit 4:
0 ‐ User input to be in unpacked format
1 ‐ User input to be in SMS packed format
bits 5 to 7:
0
bit 8:
0 ‐ No help information available
1 ‐ Help information available
<text> ‐ string as prompt for text
<responseMin> ‐ minimum length of user input
0‐255
<responseMax> ‐ maximum length of user input
0‐255
<defaultText> ‐ string supplied as default response text
if <cmdType>=36 (SELECT ITEM)
The first line of output is:
#STGI: <cmdType>,<commandDetails>,<numOfItems>[,<titleText>]
<CR><LF>
One line follows for every item, repeated for <numOfItems>:
#STGI: <cmdType>,<itemId>,<itemText>[,<nextActionId>]
where:
<commandDetails> ‐ unsigned Integer used as a bitfield
0‐255 ‐ used as a bit field:
bit 1:
0 ‐ Presentation type is not specified
1 ‐ Presentation type is specified in bit 2
bit 2:
0 ‐ Presentation as a choice of data values if bit 1 = '1'
1 ‐ Presentation as a choice of navigation options if bit 1 is '1'
bit 3:
0 ‐ No selection preference
1 ‐ Selection using soft key preferred
bits 4 to 7:
0
bit 8:
0 ‐ No help information available