Synaccess Networks NP-0801DTM - Manual (Page 86)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 86
Examples
AT+CCLK="02/09/07,22:30:00+00"
OK
AT+CCLK?
+CCLK: 02/09/07,22:30:25
OK
Alarm Management +CALA
Set command stores in the internal Real Time Clock an alarm time with respective settings. It is possible to set up a
recurrent alarm for one or more days in the week.
Currently just one alarm can be set.
When the RTC time reaches the alarm time then the alarm starts, the behavior of the module depends upon the
setting <type> and if the device was already ON at the moment when the alarm time had come.
Read command returns the list of current active alarm settings in the ME, in the format:
[+CALA: <time>,<n>,<type>,[<text>],<recurr>,<silent>]
Test command returns the list of supported index values (currently just 0), alarm types, maximum length of the
text to be displayed, maximum length of <recurr> and supported <silent>s, in the format:
+CALA: (list of supported <n>s),(list of supported <type>s),<tlength>,
<rlength>,(list of supported <silent>s)
Syntax
Command Command type
AT+CALA=<time>[,<n>[,<type>[,<text>[,<recurr>[,<silent>]]]]] Set
AT+CALA? Read
AT+CALA=? Test