Synaccess Networks NP-0801DTM - Manual (Page 293)

GPS AT COMMANDS SET
293 HSPA+ AT Commands Reference Guide
Parameters and Values
This section describes the information displayed when you use the Execute command.
<UTC> UTC time (hhmmss.sss) referred to GGA sentence.
<latitude> Format is ddmm.mmmm N/S, referred to GGA sentence.
where:.
dd ‐ degrees
00‐90
mm.mmmm ‐ minutes
00.0000‐59.9999
N/S ‐ North / South
<longitude> Format is dddmm.mmmm E/W, referred to GGA sentence.
where:
ddd ‐ degrees
000‐180
mm.mmmm ‐ minutes
00.0000‐59.9999
E/W: East / West
<hdop> x.x ‐ Horizontal Dilution of Precision, referred to GGA sentence.
<altitude> x.x Altitude ‐ mean‐sea‐level (geoid) in meters, referred to GGA sentence.
<fix>
0 Invalid fix.
2 2D fix.
3 3D fix.
<cog> ddd.mm ‐ Course over Ground (degrees, True), referred to VTG sentence, where:
ddd Degrees
000‐360
mm Minutes
00‐59
<spkm> x.x Speed over ground (Km/hr), referred to VTG sentence.
<spkn> x.x‐ Speed over ground (knots), referred to VTG sentence.
<date> ddmmyy Date of Fix, referred to RMC sentence.
where:
dd ‐ day
01‐31
mm ‐ month
01‐12
yy ‐ year
00‐99 ‐ 2000 to 2099
<nsat> nn ‐ Total number of satellites in use, referred to GGA sentence.
00‐12
Examples
AT$GPSACP
$GPSACP:080220.479,4542.82691N,01344.26820E,259.07,3,2.1,0.1,0.0,0.0,270705,09
OK