Notes, Examples, Change facility password +cpwd – Synaccess Networks NP-0801DTM User Manual
Page 58: Syntax
3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide
58
1
Voice (telephony)
2
Data. Refers to all bearer services.
4
Fax. Facsimile services.
8
Short message service.
16
Data circuit sync.
32
Data circuit async.
64
Dedicated packet access.
128
Dedicated PAD access.
<mode>
Defines the operation to be done on the facility.
0
Unlock facility.
1
Lock facility.
2
Query status.
<passwd>
The same as password specified for the facility from the DTE user interface or
with command Change Password +CPWD.
Note: When <mode>=2 and command successful, it returns:
+CLCK: <status>[,<class1>[<CR><LF>+CLCK: <status>,<class2>
[…]]
where
<status> ‐ the current status of the facility
0 ‐ not active
1 ‐ active
<classn> ‐ class of information of the facility
Notes
Reference 3GPP TS 27.007.
Examples
When queried, to have the facility return output on three rows: the first for voice, the second for data, the third
for fax:
AT+CLCK =”AO”,2
+CLCK: <status>,1
+CLCK: <status>,2
+CLCK: <status>,4
Change Facility Password +CPWD
Execute command changes the password for the facility lock function defined by command Facility Lock +CLCK.
Test command returns a list of pairs (<fac>,<pwdlength>) which presents the available facilities and the maximum
length of their password (<pwdlength>).
Syntax
Command
Command type
AT+CPWD=<fac>, <oldpwd>, <newpwd>
Execute
AT+CPWD=?
Test