Synaccess Networks NP-0801DTM - Manual (Page 177)

CUSTOM AT COMMANDS
177 HSPA+ AT Commands Reference Guide
1 Enable PSNT unsolicited result code.
SIM Presence Status #SIMPR
Set command enables or disables the SIM Presence Status unsolicited indication in the ME. This command reports
also the status of the remote SIM, if the SAP function is supported and is enabled.
Read command reports whether the unsolicited indication #SIMPR is currently enabled or not, along with the local
and remote SIM status, in the format:
#SIMPR: <mode>,0,<status><CR><LF>
#SIMPR: <mode>,1,<status>
If SAP function is not supported or enabled the remote SIM status is always 0.
Test command reports the range for the parameter <mode>.
Syntax
Command Command type
AT#SIMPR=[<mode>] Set
AT#SIMPR? Read
AT#SIMPR=? Test
Parameters and Values
<mode> Notification type.
0 Disabled. Default: 0.
1 Enabled. The ME informs at every (local and remote) SIM status change through
the following unsolicited indication:
#SIMPR: <SIM>,<status>
where:
<SIM> ‐ local or remote SIM
0 local SIM
1 remote SIM
<status> ‐ current SIM status
0 ‐ SIM NOT INSERTED
1 ‐ SIM INSERTED
Notes
„
Call Forwarding Flags #CFF
Set command enables or disables the presentation of the call forwarding flags URC.
Read command reports if the presentation of the call forwarding flags URC is enabled and, if the flags field is
present in the SIM, the current status of the call forwarding flags as they are currently stored on SIM, and the
number incoming calls are forwarded to. The format is:
#CFF: <enable>[,<status>,< fwdtonum >]
Test command returns the range of available values for parameter <enable>.