Synaccess Networks NP-0801DTM - Manual (Page 295)

GPS AT COMMANDS SET
295 HSPA+ AT Commands Reference Guide
Syntax
Command Command type
AT$GPSNVRAM =
<bitfield>,<action> Execute
AT$GPSNVRAM? Read
AT$GPSNVRAM=? Test
Parameters and Values
<bitfield> Integer format. Assistance data mask for the types of GPS‐data to read/delete, as
follows:
1 Ephemeris.
2 Location.
4 Time.
8 Almanac.
<action>
0 Delete data described in bitfield.
Notes
„
The current setting is stored through $GPSSAV.
Examples
AT$GPSNVRAM=15,0
OK
GPS Quality of Service $GPSQOS
Command used to set the location’s quality of service (QoS).
Read command returns the current QoS values, in the format:
AT$GPSQOS: <horiz_accuracy>,<vertic_accuracy>,<rsp_time>
,<age_of_location_info>,<location_type>,<nav_profile>,<velocity_request>
Test command returns the list of supported QoS values for each field.
$GPSQOS: (0‐1800000),(0‐990),(0‐14400),(0‐1966020),(0‐2),(0‐3),(0,1)
Syntax
Command Command type
AT$GPSQOS=[<horiz_accuracy>[,<vertic_accuracy>[,<rsp_time>
[,<age_of_location_info>[,<location_type>[,<nav_profile>[,<velocity_reques
t>]]]]]]] Execute
AT$GPSQOS? Read
AT$GPSQOS=? Test