Synaccess Networks NP-0801DTM - Manual (Page 287)

SIM TOOLKIT COMMANDS
287 HSPA+ AT Commands Reference Guide
Parameters and Values
<cmdType> Integer type; proactive command ID according to GSM 11.14. See #STGI.
<userResponse> Action performed by the user.
0 Command performed successfully. Call accepted in case of call setup.
16 Proactive SIM session terminated by user.
17 Backward move in the proactive SIM session requested by the user.
18 No response from user.
19 Help information required by the user.
20 USSD/SS Transaction terminated by user.
32 TA currently unable to process command.
34 User denied SIM call setup request.
35 User cleared down SIM call before connection or network release.
<data> Data entered by user, depending on <cmdType>, only required if <Result> is
0.
Get Inkey
<data> contains the key that is user pressed. Used character set is selected
with +CSCS.
Note: If, as a user response, a binary choice (Yes/No) is requested by the
SIM application using bit 3 of the <commandDetails> parameter the valid
content of the <inputString> is:
a) “IRA”, ”8859‐1”, ”PCCP437” charsets: “Y” or “y” (positive answer) and “N”
or “n” (negative answer)
b) UCS2 alphabet “0079” or “0059” (positive answer) and “006E” or “004E”
(negative answer)
Get Input
<data> ‐ contains the string of characters entered by the user (see above).
Select Item
<data> ‐ contains the item identifier selected by the user.
Note: Use of icons is not supported. All icon related actions respond with no
icon available.