Synaccess Networks NP-0801DTM - Manual (Page 303)

GPS AT COMMANDS SET
303 HSPA+ AT Commands Reference Guide
Location Request Verification $LCSLRV
Set command verifies a location request coming from the network. The verification is sent back to the network
with request id.
Test command returns the range of values for <permission>.
Syntax
Command Command type
AT$LCSLRV=<permission>,<reqid> Set
AT$LCSLRV=? Test
Parameters and Values
<permission>
0 Permission denied. Default: 0.
1 Permission granted.
<reqid> Uniquely identifies the MT‐LR sent by the network.
LCS Certificate $LTC
Set command passes the security objects (for example certificate, key) to the Transport Layer Security Protocol
(binary string).
Test command returns the range of values for <total_message_length> and <seq_no>.
Syntax
Command Command type
AT$LTC=<string>,<total_message_length>,<seq_no>,<Security_
Object_Type> Set
AT$LTC=? Test
Parameters and Values
<string> The string certificate segment. Maximum 300 bytes per segment.
<total_message_length> The total size of the certificate to be received.
1‐4096
<seq_no> The sequence number of the segment.
1‐13
<Security_Object_Type> 0: Root Certificate.
Lock Context for LCS Use $LCSLK
Set command reserves a cid for LCS. Note: The set command returns ERROR if the current cid or the previously set
are in use.
Read command returns the current value of parameters <mode> and <cid>, if <mode> is lock.
Test command returns the range of values for <mode> and <cid>.