Synaccess Networks NP-0801DTM - Manual (Page 30)

HAYES COMPLIANT AT COMMANDS
HSPA+ AT Commands Reference Guide 30
Display Last Connection Statistics &V2
Execute command returns the last connection statistics & connection failure reason.
Syntax
Command Command type
AT&V2 Execute
Single Line Connect Message \V
Execute command set single line connect message.
Syntax
Command Command type
AT\V<n> Execute
Parameters and Values
<n>
0 Off.
1 On.
Country of Installation +GCI
Set command selects the installation country code according to ITU‐T.35 Annex A.
Read reports the currently selected country code.
Test command reports the supported country codes.
Syntax
Command Command type
AT+GCI=<code> Set
AT+GCI? Read
AT+GCI=? Test
Parameters and Values
<code>
59 Currently supports only the Italy country code.
Notes
„
Reference: V.25ter.