Synaccess Networks NP-0801DTM - Manual (Page 122)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
HSPA+ AT Commands Reference Guide 122
[0] ‐ there are no more VP fuction indicator extension octets to follow
bit[6]: Single Shot SM;
[0] ‐ the SC is not required to make up to one delivery attempt
[1] ‐ the SC is required to make up to one delivery attempt
bit[5]bit[4]bit[3]: reserved
[000]
bit[2]bit[1]bit[0]: Validity Period Format
[000] ‐ No Validity Period specified
[001] ‐ Validity Period specified as for the relative format. The following octet
contains the VP value as described before. All other octets are 0s.
[010] ‐ Validity Period is relative in integer representation. The following octet
contains the VP value in the range 0 to 255, representing 0 to 255 seconds. All
other octets are 0s.
[011] ‐ Validity Period is relative in semi‐octet representation. The following 3
octets contain the relative time in Hours, Minutes and Seconds, giving the length
of the validity period counted from when SC receives the SMS‐SUBMIT. All other
octets are 0s.
<pid> 3GPP TS 23.040 TP‐Protocol‐Identifier in integer format.
<dcs> Depending on the command or result code: 3GPP TS 23.038 SMS Data Coding
Scheme. Default: 0, or Cell Broadcast Data Coding Scheme
Note: The current settings are stored through +CSAS.
Note: The <vp> value is also stored through +CSAS, but only as integer type, that
is, only in its relative format.
Notes
„
Reference: GSM 27.005; 3GPP TS 23.040; 3GPP TS 23.038.
Examples
Set the parameters for an outgoing message with 24 hours of validity period and default properties:
AT+CSMP=17,167,0,0
OK
Set the parameters for an outgoing message with validity period in enhanced format: the <vp> string actually
codes 24 hours of validity period.
AT+CSMP=9,“01A80000000000“
OK
Set the parameters for an outgoing message with validity period in enhanced format: the <vp> string actually
codes 60 seconds of validity period.
AT+CSMP=9,“023C0000000000“
OK
Set the parameters for an outgoing message with validity period in enhanced format: the <vp> string actually
codes 29 hours 85 minutes 30 seconds of validity period.
AT+CSMP=9,“03925803000000“