Synaccess Networks NP-0801DTM - Manual (Page 246)

FTP AT COMMANDS
HSPA+ AT Commands Reference Guide 246
FTP Delete #FTPDELE
Execute command, issued during an FTP connection, deletes a file from the remote working directory.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPDELE=[<filename>] Execute
AT#FTPDELE=? Test
Parameters and Values
<filename> String type indicating the name of the file to delete.
Notes
„
The Execute command causes an ERROR result code if no FTP connection is open.
„
If the server response is delayed, check if ERROR indication is temporary due to timing out while waiting.
In this case #FTPMSG response results temporary empty.
Checking later #FTPMSG response matches with delayed server response.
FTP Print Working Directory #FTPPWD
Execute command, issued during an FTP connection, shows the current working directory on FTP server.
Test command returns the OK result code
Syntax
Command Command type
AT#FTPPWD Execute
AT#FTPPWD=? Test
Notes
„
The Execute command causes an ERROR result code if no FTP connection is open.
FTP Change Working Directory #FTPCWD
Execute command, issued during an FTP connection, changes the working directory on FTP server.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPCWD=[<dirname>] Execute
AT#FTPCWD=? Test
Parameters and Values
<dirname> String type, name of the new working directory.