Synaccess Networks NP-0801DTM - Manual (Page 245)

FTP AT COMMANDS
245 HSPA+ AT Commands Reference Guide
Parameters and Values
<filename> String type, file name.
<viewMode> Permit to choose view mode. Text format or hexadecimal.
Notes
„
The Execute command causes an ERROR result code if no FTP connection is open.
„
The application always handles command closure. To avoid download stall situations ensure the application
implements a timeout.
FTP Type #FTPTYPE
Set command, issued during an FTP connection, sets the file transfer type.
Read command returns the current file transfer type, in the format:
#FTPTYPE: <type>
Test command returns the range of available values for parameter <type>:
#FTPTYPE: (0,1)
Syntax
Command Command type
AT#FTPTYPE=[<type>] Set
#FTPTYPE? Read
#FTPTYPE=? Test
Parameters and Values
<type> File transfer type.
0 Binary.
1 Ascii.
Notes
„
The command causes an ERROR result code if no FTP connection is opened.
FTP Read Message #FTPMSG
Execute command returns the last response from the server.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPMSG Execute
AT#FTPMSG=? Test