Synaccess Networks NP-0801DTM - Manual (Page 224)

CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide 224
AT#SCFGEXT2?
#SCFGEXT2: 1,1,0,0,0,0
#SCFGEXT2: 2,1,0,0,0,0
#SCFGEXT2: 3,0,0,0,0,0
#SCFGEXT2: 4,0,0,0,0,0
#SCFGEXT2: 5,0,0,0,0,0
#SCFGEXT2: 6,0,0,0,0,0
OK
AT#SCFG?
#SCFG: 1,1,300,90,600,50
#SCFG: 2,1,300,90,600,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG=1,1,300,90,600,30
OK
Current configuration: socket with connId 1 and 2 are configured with new transmission timer behavior.
<txTo> corresponding value is changed(#SCFG) for connId 1, for connId 2 is left to default value.
Socket Dial #SD
Execute command opens a remote connection through socket.
Test command reports the range of values for all parameters.
Syntax
Command Command type
AT#SD=<connId>,<txProt>,<rPort>,<IPaddr>[,<closureType>
[,<lPort>[,<connMode>]]] Execute
AT#SD=? Test