Synaccess Networks NP-0801DTM - Manual (Page 319)

AUDIO COMMANDS
319 HSPA+ AT Commands Reference Guide
Handsfree Automatic Gain Control #SHFAGC
This command has no effect and is included only for backward compatibility.
Read command reports the value of <mode>, in the format:
#SHFAGC: <mode>
Test command returns the supported range of values for <mode>.
Syntax
Command Command type
AT# SHFAGC =<mode> Set
AT# SHFAGC? Read
AT# SHFAGC =? Test
Parameters and Values
<mode>
0‐1 Default: 0.
Notes
„
To save <mode> value in non‐volatile memory use the AT&W command.
Handset Automatic Gain Control #SHSAGC
Set command enables or disables the automatic gain control function on audio handset input.
Read command reports whether the automatic gain control function on audio handset input is currently enabled
or not, in the format:
#SHSAGC: <mode>
Test command returns the supported range of values for <mode>.
Syntax
Command Command type
AT#SHSAGC =<mode> Set
AT#SHSAGC? Read
AT#SHSAGC =? Test
Parameters and Values
<mode>
0 Disables automatic gain control for handset mode. Default: 0.
1 Enables automatic gain control for handset mode.
Note: This parameter is saved in non‐volatile memory issuing AT&W command.