Synaccess Networks NP-0801DTM - Manual (Page 29)

HAYES COMPLIANT AT COMMANDS
29 HSPA+ AT Commands Reference Guide
Notes
„
This command is the same as &V, it is included only for backwards compatibility.
„
The row of information about CTS (C106) OPTIONS is in the output of &V0 only for compatibility reasons and
represents only a dummy value.
S Registers Display &V1
Use this command to get the value of the S registers in decimal and hexadecimal value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
Syntax
Command Command type
AT&V1
Parameters and Values
<regn> S register number.
<dec> Current value in decimal notation.
<hex> Current value in hexadecimal notation.
Extended S Registers Display &V3
Execute command returns the value of the S registers in decimal and hexadecimal value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
Syntax
Command Command type
AT&V3 Execute
Parameters and Values
<regn> S register number.
000‐005
007
012
025
030
038
<dec> Current value in decimal notation.
<hex> Current value in hexadecimal notation.