Synaccess Networks NP-0801DTM - Manual (Page 247)

FTP AT COMMANDS
247 HSPA+ AT Commands Reference Guide
Notes
„
The Execute command causes an ERROR result code if no FTP connection is open.
FTP List #FTPLIST
Execute command, issued during an FTP connection, opens a data connection and starts getting from the server
the list of contents of the specified directory or the properties of the specified file.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPLIST[=[<name>]] Execute
AT#FTPLIST=? Test
Parameters and Values
<name> Sting type, name of the directory or file.
Notes
„
The Execute command causes an ERROR result code to be returned if no FTP connection is opened yet.
„
Issuing AT#FTPLIST<CR> opens a data connection and starts getting from the server the list of contents of the
working directory.
Get File Size #FTPFSIZE
Execute command, issued during an FTP connection, permits to get file size of <filename> file.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPFSIZE=<filename> Execute
AT# FTPFSIZE=? Test
Notes
„
Issue FTPTYPE=0 command before FTPFSIZE command, to set file transfer type to binary mode.