Synaccess Networks NP-0801DTM - Manual (Page 181)

CUSTOM AT COMMANDS
181 HSPA+ AT Commands Reference Guide
“yy/MM/dd,hh:mm:ss±zz” ‐ ‘extended’ format, if <val> is in (4‐7).
“yy/MM/dd,hh:mm:ss±zz,d” ‐ ‘extended’ format with DST support, if <val> is in
(8‐15).
where:
yy – year.
MM – month, in digits.
dd – day.
hh – hour.
mm – minute.
ss – second.
zz ‐ time zone. Indicates the difference, expressed in quarter of an hour,
between the local time and GMT; two last digits are mandatory, range is ‐47 to
+48).
d – Number of hours added to the local time zone because of daylight savings
time (DST) adjustment. Range is 0‐3.
Note: If the DST information is not sent by the network, then the <datetime>
parameter has the format “yy/MM/dd,hh:mm:ss±zz”.
Notes