Setting all can nodes to the "operational" status – Lenze ECSCSxxx User Manual
Page 231
Advertising
![background image](/manuals/566263/231/background.png)
Diagnostics
Diagnostics with PCAN−View
Setting all CAN nodes to the "Operational" status
l
231
EDBCSXS064 EN 4.0
10.4.2
Setting all CAN nodes to the "Operational" status
How to set all CAN nodes to the "Operational" status:
1. Create the following CAN message under "New transmit message":
2. Select the CAN message in the "Transmit" window and press the <space bar> once
to transmit the CAN message.
Advertising