Lenze ECSCSxxx - Manual (Page 426)

Appendix
Code table
13
l
426 EDBCSXS064 EN 4.0
IMPORTANT Possible settings Code
Selection Lenze/
{Appl.} Designation No.
C7530 Display of the current signal
states on the analog input of the
"Torque" function block
−32768
(= −100 %) {1} 32767
(= 100 %)
1 TorqueIn−anl Torque setpoint
(SPEED-MCTRL.MAdd) ^ 354
2 TorqueIn−anl Setpoint for the upper limit of
speed limitation
(TORQUE−NSET.NSet) ^ 351
3 TorqueIn−anl Lower torque limit
(TORQUE-MCTRL.negLoMLim) ^ 354
4 TorqueIn−anl Upper torque limit
(TORQUE-MCTRL.HiMLim)
5 TorqueIn−anl Setpoint for the lower limit of
speed limitation
(TORQUE−MCTRL.NStartMLim)
6 TorqueIn−anl Manual field weakening
(TORQUE−MCTRL.FldWeak)
7 TorqueIn−anl Manual adaptation of the
proportional gain of the speed
controller
(TORQUE−MCTRL.NAdapt)
8 TorqueIn−anl Manual adaptation of the
integral−action component of the
speed controller
(TORQUE−MCTRL.ISet)
9 TorqueIn−anl Torque threshold for the motor
holding brake
(TORQUE−BRK.TorqueThreshold) ^ 360
10 TorqueIn−anl Direction of torque created by
the drive against the motor
holding brake
(TORQUE−BRK.Sign)