Yaskawa YASNAC PC NC Programming Manual User Manual
Page 96
Advertising
3 - 46
YASNAC PCNC Programming Manual
Chapter 3: Movement Control Commands
•
Straight-line to straight-line at outside corner (270° to 360°)
;
FIGURE 3.4.4.9 Offset Start-up (Straight-line to Straight-line (2))
•
Straight-line to arc at outside corner (180° to 270°)
FIGURE 3.4.4.10 Offset Start-up (Straight-line to Arc (1))
Advertising