Adept AdeptSight User Guide - Manual (Page 255)

l
Radial - Radial projection is used to find edges aligned along radial projections, much
like the spokes of a wheel.
The default Projection Mode is Radial.
Results Logging
If enabled, the results of the tool will be logged to a file.
If the extension of the destination file is csv, then the log is written in csv format, which
opens with Excel. If a different extension is selected, the log is written in a plain text format
(similar to the AdeptSight 2 format).
The size of the log file can be set (default size is 5 Mb).
Related Topics
Arc Caliper on page 241
Configuring Arc Caliper Properties on page 245
Arc Caliper Results on page 257
Related Topics
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 255