Adept AdeptSight User Guide - Manual (Page 441)

Filtering Kernel Size
Filtering Kernel Size sets the size of the kernel applied by a fixed (predefined) filtering oper-
ation.
Filtering Scale
Filtering Scale sets the scaling factor applied by a filtering operation. After the operation has
been applied, the value of each pixel is multiplied by the Filtering Scale value.
Histogram Properties
This is used to set the parameters for a histogram operation.
Histogram operations can only be applied to an unsigned 8-bit image.
Histogram Threshold
Histogram Threshold sets threshold value applied by a histogram thresholding operation
Logical Properties
This is used to set the constant operand for a logical operation.
Logical Constant
Logical Constant defines constant that applied as an operand by a logical operation. This con-
stant is applied only when no valid Operand Image is specified.
Morphological Properties
This is used to set the parameters for a morphological operation.
Morphological operations are used to eliminate or fill small and thin holes in objects, break
objects at thin points or connect nearby objects. These operations generally smooth the
boundaries of objects without significantly changing their area.
Morphological Neighborhood Size
Morphological Neighborhood Size neighborhood is the neighborhood by a morphological oper-
ation. This value is currently fixed at 3x3. No other values are allowed.
Transform Properties
Transform operations convert and output a frequency description of the input image. The
available operations are a Fast Fourier Transform (FFT) and a Discrete Cosine Transform
(DCT). These transforms can be output as 1D Linear, 2D Linear, 2D Logarithmic or His-
togram.
Histogram Properties
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 441